N-butanol

N-butanol

1. Product introduction

N-butanol is an organic compound, chemical formula CH3(CH2)3OH, colorless transparent liquid, burning with strong flame. It has an odor similar to fusel oil and its vapors are irritating and can cause coughing. Boiling point 117-118℃, relative density 0.810. 63% n - butanol and 37% water form azeotrope. It is miscible with ethanol, ether and many other organic solvents. It is obtained by fermentation of sugars, or by catalytic hydrogenation of n-butanal or butenal. Used as a solvent for fats, waxes, resins, shellac, varnishes, etc., or in the manufacture of paints, artificial fibers, detergents, etc. 

2. Product Parameters (Specifications)

3. Product features and uses

1. Mainly used for the manufacture of phthalic acid, aliphatic diacid and phosphoric acid of n-butyl ester plasticizer, they are widely used in a variety of plastic and rubber products. It is also the raw material for organic synthesis of butyral, butyric acid, butylamine and butyl lactate. Dehydrating agent, anti-emulsifier and oil, drugs (such as antibiotics, hormones and vitamins) and spices extraction agent, alkyd resin coating additives, etc. Also can be used as organic dyes and printing ink solvent, dewaxing agent. As a solvent for the separation of potassium perchlorate and sodium perchlorate, sodium chloride and lithium chloride. For washing uranyl zinc sodium acetate precipitation. Colorimetric determination of arsenic acid by molybdate method. Determination of fat in milk. Saponified ester medium. Paraffin embedded material was prepared during microanalysis. Used as a solvent for fat, wax, resin, shellac, gum, etc. Nitro spray paint solvent, etc. [2]

2. Standard substance for chromatographic analysis. Used for colorimetric determination of arsenic acid, separation of potassium, sodium, lithium, chlorate solvent. 

3. As an important solvent, it is widely used in the production of urea-formaldehyde resin, cellulose resin, alkyd resin and coatings, and can also be used as a non-active diluent in adhesives. It is also an important chemical raw material for the production of plasticizer dibutyl phthalate, aliphatic diacid ester, phosphate ester. Also used as dehydrating agent, anti-emulsifier and oil, spices, antibiotics, hormones, vitamins and other extraction agent, alkyd resin coating additives, nitro spray solvent, etc.

4. Cosmetic solvents. Mainly in nail polish and other cosmetics as a co-solvent, with ethyl acetate and other main solvent, help to dissolve the color and adjust the solvent volatilization speed and viscosity. The dosage is generally about 10%.

5 screen printing can be used as ink deployment of defoaming agent.

6. Used in baked goods, puddings, candies.

4. Product details

Leakage treatment: a small amount of leakage can be absorbed with activated carbon or other inert materials, or washed with a large amount of water, and then diluted into the wastewater system; A large number of leakage to build a dike or dug pit reception, covered with foam, reduce the steam disaster, with explosion-proof pump transferred to the tank or professional collector, recycling or transported to the waste treatment site disposal. 

Dangerous characteristics: flammable, its steam and air can form explosive mixture, in case of open fire, high heat energy causes combustion and explosion. Violent reaction on contact with the oxidizer. In a fire, the heated container is in danger of exploding. 

 Harmful combustion products: carbon monoxide, carbon dioxide. 

The fire fighting

Spray the escaping liquid with water to dilute it into an insoluble mixture and protect firefighters with a mist of water. Extinguish the fire with dissolvable foam, dry powder, carbon dioxide, mist water, 1211 extinguishing agent, sand soil. 

Precautions for use

Operators should wear protective equipment. Maximum allowable concentration in air 100mL/m3 in operating area.

5. Delivery, transportation and services

The company has a professional distribution system, can be customized according to customer requirements of n-butanol and other products personalized distribution services.

6.FAQ

1.How many production lines in your factory?

Our company has two production lines.

2. How long is your delivery time?

Around 7 days to 15 days